This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1740649124 | 191 Count | 686 Count | 31 Count | 4 VDC | 0 VDC |
| 1740647324 | 183 Count | 656 Count | 30 Count | 4 VDC | 0 VDC |
| 1740645523 | 175 Count | 629 Count | 29 Count | 4 VDC | 0 VDC |
| 1740643722 | 167 Count | 601 Count | 28 Count | 3.99 VDC | 0 VDC |
| 1740641922 | 159 Count | 573 Count | 27 Count | 3.99 VDC | 0 VDC |
| 1740640121 | 151 Count | 543 Count | 26 Count | 3.99 VDC | 0 VDC |
| 1740638320 | 143 Count | 513 Count | 25 Count | 3.99 VDC | 0 VDC |
| 1740636520 | 128 Count | 463 Count | 17 Count | 3.98 VDC | 0 VDC |
| 1740634719 | 119 Count | 432 Count | 15 Count | 3.98 VDC | 0 VDC |
| 1740632918 | 111 Count | 399 Count | 14 Count | 3.98 VDC | 0 VDC |
| 1740631118 | 103 Count | 366 Count | 13 Count | 3.98 VDC | 0 VDC |
| 1740629317 | 95 Count | 336 Count | 12 Count | 3.99 VDC | 0 VDC |
| 1740627516 | 87 Count | 305 Count | 11 Count | 3.99 VDC | 0 VDC |
| 1740625715 | 79 Count | 276 Count | 10 Count | 3.98 VDC | 0 VDC |
| 1740623915 | 71 Count | 244 Count | 9 Count | 3.98 VDC | 0 VDC |
| 1740622114 | 63 Count | 215 Count | 8 Count | 3.99 VDC | 0 VDC |
| 1740620313 | 55 Count | 185 Count | 7 Count | 3.99 VDC | 0 VDC |
| 1740616713 | 39 Count | 130 Count | 5 Count | 3.98 VDC | 0 VDC |
| 1740614911 | 31 Count | 106 Count | 4 Count | 3.99 VDC | 0 VDC |
| 1740613110 | 23 Count | 81 Count | 3 Count | 3.99 VDC | 0 VDC |
| 1740611309 | 15 Count | 55 Count | 2 Count | 3.99 VDC | 0 VDC |
| 1740609508 | 7 Count | 29 Count | 1 Count | 3.98 VDC | 0 VDC |
| 1740607708 | 328 Count | 1006 Count | 108 Count | 3.99 VDC | 0 VDC |
| 1740605907 | 320 Count | 976 Count | 107 Count | 3.99 VDC | 0 VDC |
| 1740604106 | 312 Count | 951 Count | 106 Count | 3.99 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)