This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1739974854 | 145 Count | 819 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1739973054 | 143 Count | 800 Count | 0 Count | 4.08 VDC | 1.74 VDC |
| 1739971255 | 141 Count | 782 Count | 0 Count | 4.08 VDC | 1.68 VDC |
| 1739969456 | 139 Count | 764 Count | 0 Count | 4.08 VDC | 2.12 VDC |
| 1739967656 | 137 Count | 746 Count | 0 Count | 4.08 VDC | 2.94 VDC |
| 1739965856 | 135 Count | 728 Count | 0 Count | 4.08 VDC | 2.16 VDC |
| 1739964057 | 133 Count | 710 Count | 0 Count | 4.07 VDC | 0.98 VDC |
| 1739962258 | 131 Count | 692 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739960459 | 129 Count | 674 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739958660 | 127 Count | 656 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739956860 | 125 Count | 638 Count | 0 Count | 4.08 VDC | 0.98 VDC |
| 1739955061 | 123 Count | 620 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739953263 | 121 Count | 602 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739949663 | 117 Count | 564 Count | 0 Count | 4.08 VDC | 0.98 VDC |
| 1739947864 | 115 Count | 546 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739946065 | 113 Count | 528 Count | 0 Count | 4.08 VDC | 0.98 VDC |
| 1739944265 | 111 Count | 510 Count | 0 Count | 4.08 VDC | 0.98 VDC |
| 1739942465 | 109 Count | 492 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739938867 | 105 Count | 460 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739937067 | 103 Count | 443 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739935269 | 101 Count | 424 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739933468 | 99 Count | 399 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739931668 | 97 Count | 381 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1739929870 | 95 Count | 363 Count | 0 Count | 4.08 VDC | 0.98 VDC |
| 1739928069 | 93 Count | 345 Count | 0 Count | 4.08 VDC | 0.98 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)