This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1740061276 | 447 Volts | 544 Deg.F | 0 | 0 | 0 |
| 1740060378 | 450 Volts | 542 Deg.F | 0 | 0 | 0 |
| 1740059480 | 442 Volts | 542 Deg.F | 0 | 0 | 0 |
| 1740058581 | 443 Volts | 541 Deg.F | 0 | 0 | 0 |
| 1740057682 | 509 Volts | 540 Deg.F | 0 | 0 | 0 |
| 1740056784 | 450 Volts | 538 Deg.F | 0 | 0 | 0 |
| 1740055885 | 445 Volts | 538 Deg.F | 0 | 0 | 0 |
| 1740054987 | 441 Volts | 538 Deg.F | 0 | 0 | 0 |
| 1740054088 | 441 Volts | 537 Deg.F | 0 | 0 | 0 |
| 1740053189 | 441 Volts | 538 Deg.F | 0 | 0 | 0 |
| 1740052291 | 441 Volts | 538 Deg.F | 0 | 0 | 0 |
| 1740051393 | 441 Volts | 539 Deg.F | 0 | 0 | 0 |
| 1740050494 | 440 Volts | 539 Deg.F | 0 | 0 | 0 |
| 1740049595 | 444 Volts | 539 Deg.F | 0 | 0 | 0 |
| 1740048697 | 442 Volts | 540 Deg.F | 0 | 0 | 0 |
| 1740047798 | 441 Volts | 540 Deg.F | 0 | 0 | 0 |
| 1740046900 | 445 Volts | 541 Deg.F | 0 | 0 | 0 |
| 1740046001 | 448 Volts | 541 Deg.F | 0 | 0 | 0 |
| 1740045103 | 456 Volts | 541 Deg.F | 0 | 0 | 0 |
| 1740044204 | 513 Volts | 542 Deg.F | 0 | 0 | 0 |
| 1740043306 | 447 Volts | 542 Deg.F | 0 | 0 | 0 |
| 1740042408 | 444 Volts | 542 Deg.F | 0 | 0 | 0 |
| 1740041509 | 443 Volts | 543 Deg.F | 0 | 0 | 0 |
| 1740040611 | 441 Volts | 543 Deg.F | 0 | 0 | 0 |
| 1740039712 | 443 Volts | 544 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)