APRS Track Direct

My position About ☰

reset

9A7KXP-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Temp*
1733086080	195 Pkt	1270 Pkt	35 Pkt	19.18 Pcnt	-64 C
1733085780	188 Pkt	1260 Pkt	33 Pkt	19.18 Pcnt	-64 C
1733085480	192 Pkt	1290 Pkt	40 Pkt	19.19 Pcnt	-64 C
1733085180	199 Pkt	1280 Pkt	40 Pkt	19.19 Pcnt	-64 C
1733084882	202 Pkt	1270 Pkt	35 Pkt	19.17 Pcnt	-64 C
1733084880	202 Pkt	1270 Pkt	35 Pkt	19.17 Pcnt	-64 C
1733084580	192 Pkt	1250 Pkt	34 Pkt	19.18 Pcnt	-64 C
1733084280	181 Pkt	1260 Pkt	34 Pkt	19.18 Pcnt	-64 C
1733083980	178 Pkt	1230 Pkt	33 Pkt	19.19 Pcnt	-64 C
1733083680	193 Pkt	1240 Pkt	37 Pkt	19.18 Pcnt	-64 C
1733083380	191 Pkt	1240 Pkt	42 Pkt	19.18 Pcnt	-64 C
1733083080	217 Pkt	1250 Pkt	40 Pkt	19.17 Pcnt	-64 C
1733082780	173 Pkt	1220 Pkt	27 Pkt	19.17 Pcnt	-64 C
1733082480	213 Pkt	1220 Pkt	35 Pkt	19.18 Pcnt	-64 C
1733082180	203 Pkt	1220 Pkt	33 Pkt	19.18 Pcnt	-64 C
1733082180	203 Pkt	1220 Pkt	33 Pkt	19.18 Pcnt	-64 C
1733081880	165 Pkt	1220 Pkt	35 Pkt	19.19 Pcnt	-64 C
1733081580	174 Pkt	1210 Pkt	33 Pkt	19.19 Pcnt	-64 C
1733081280	201 Pkt	1250 Pkt	32 Pkt	19.19 Pcnt	-64 C
1733080980	169 Pkt	1230 Pkt	22 Pkt	19.19 Pcnt	-64 C
1733080680	176 Pkt	1240 Pkt	29 Pkt	19.2 Pcnt	-64 C
1733080380	188 Pkt	1220 Pkt	31 Pkt	19.21 Pcnt	-64 C
1733080080	193 Pkt	1230 Pkt	32 Pkt	19.22 Pcnt	-64 C
1733079780	173 Pkt	1210 Pkt	35 Pkt	19.23 Pcnt	-64 C
1733079480	182 Pkt	1230 Pkt	43 Pkt	19.23 Pcnt	-64 C

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: