APRS Track Direct

My position About ☰

reset

TA2IK-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2IK-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1733320817	91 Pkt	29 Pkt	4 Pkt	-60 dBm	0.08 V
1733319893	114 Pkt	29 Pkt	3 Pkt	-60 dBm	0.08 V
1733318969	119 Pkt	25 Pkt	4 Pkt	-60 dBm	0.08 V
1733318044	129 Pkt	5 Pkt	13 Pkt	-61 dBm	0.08 V
1733317118	110 Pkt	5 Pkt	16 Pkt	-60 dBm	0.08 V
1733316195	13 Pkt	1 Pkt	4 Pkt	-60 dBm	0.08 V
1733315976	105 Pkt	17 Pkt	1 Pkt	-61 dBm	0.08 V
1733315053	105 Pkt	26 Pkt	0 Pkt	-61 dBm	0.08 V
1733314127	108 Pkt	22 Pkt	1 Pkt	-60 dBm	0.08 V
1733313204	86 Pkt	17 Pkt	0 Pkt	-61 dBm	0.08 V
1733312282	115 Pkt	19 Pkt	1 Pkt	-61 dBm	0.08 V
1733311358	100 Pkt	19 Pkt	0 Pkt	-60 dBm	0.08 V
1733310437	138 Pkt	23 Pkt	1 Pkt	-60 dBm	0.08 V
1733309509	122 Pkt	19 Pkt	0 Pkt	-61 dBm	0.08 V
1733308587	101 Pkt	19 Pkt	1 Pkt	-61 dBm	0.08 V
1733307660	108 Pkt	17 Pkt	0 Pkt	-61 dBm	0.08 V
1733306736	103 Pkt	19 Pkt	1 Pkt	-61 dBm	0.08 V
1733305812	130 Pkt	18 Pkt	1 Pkt	-60 dBm	0.08 V
1733304890	119 Pkt	17 Pkt	7 Pkt	-61 dBm	0.08 V
1733303964	130 Pkt	14 Pkt	19 Pkt	-60 dBm	0.08 V
1733303039	136 Pkt	20 Pkt	22 Pkt	-60 dBm	0.08 V
1733302112	124 Pkt	16 Pkt	23 Pkt	-60 dBm	0.08 V
1733301185	4 Pkt	0 Pkt	8 Pkt	-61 dBm	0.08 V
1733300382	146 Pkt	23 Pkt	13 Pkt	-60 dBm	0.08 V
1733299453	118 Pkt	19 Pkt	20 Pkt	-61 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: