APRS Track Direct

My position About ☰

reset

K8VAN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K8VAN-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1733013304	13.95 Volt	420 Pkt	70 Pkt	53 Pcnt
1733001897	13.95 Volt	460 Pkt	100 Pkt	55 Pcnt
1732983897	13.8 Volt	440 Pkt	70 Pkt	52 Pcnt
1732959300	13.95 Volt	330 Pkt	70 Pkt	50 Pcnt
1732940700	13.95 Volt	380 Pkt	80 Pkt	56 Pcnt
1732939499	13.95 Volt	370 Pkt	80 Pkt	56 Pcnt
1732922699	13.88 Volt	500 Pkt	110 Pkt	56 Pcnt
1732919699	13.88 Volt	480 Pkt	110 Pkt	54 Pcnt
1732907701	13.95 Volt	520 Pkt	120 Pkt	61 Pcnt
1732899302	13.95 Volt	480 Pkt	110 Pkt	59 Pcnt
1732895101	13.95 Volt	450 Pkt	120 Pkt	54 Pcnt
1732888500	13.8 Volt	380 Pkt	70 Pkt	54 Pcnt
1732879504	13.95 Volt	330 Pkt	60 Pkt	53 Pcnt
1732872302	13.95 Volt	330 Pkt	70 Pkt	54 Pcnt
1732868703	13.95 Volt	350 Pkt	70 Pkt	52 Pcnt
1732866903	13.95 Volt	340 Pkt	70 Pkt	50 Pcnt
1732863304	13.95 Volt	310 Pkt	60 Pkt	51 Pcnt
1732859701	13.95 Volt	360 Pkt	80 Pkt	55 Pcnt
1732857903	13.95 Volt	360 Pkt	80 Pkt	54 Pcnt
1732856104	13.95 Volt	350 Pkt	80 Pkt	54 Pcnt
1732855502	13.95 Volt	350 Pkt	80 Pkt	55 Pcnt
1732850703	13.95 Volt	320 Pkt	80 Pkt	55 Pcnt
1732783989	13.88 Volt	400 Pkt	80 Pkt	62 Pcnt
1732772105	13.88 Volt	430 Pkt	90 Pkt	55 Pcnt
1732755905	13.95 Volt	540 Pkt	150 Pkt	57 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

I1: 0, 19.5, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: