APRS Track Direct

My position About ☰

reset

ND7L-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ND7L-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1740682921	173 Pkts	168 Pkts	47 Pkts	24 C
1740679321	140 Pkts	136 Pkts	33 Pkts	24 C
1740675721	150 Pkts	145 Pkts	40 Pkts	22 C
1740672122	139 Pkts	134 Pkts	39 Pkts	22 C
1740664921	137 Pkts	130 Pkts	38 Pkts	22 C
1740657721	131 Pkts	124 Pkts	35 Pkts	22 C
1740654121	128 Pkts	123 Pkts	37 Pkts	23 C
1740650521	140 Pkts	134 Pkts	32 Pkts	23 C
1740643448	149 Pkts	146 Pkts	24 Pkts	23 C
1740639848	162 Pkts	156 Pkts	21 Pkts	24 C
1740636248	160 Pkts	153 Pkts	23 Pkts	24 C
1740632648	141 Pkts	137 Pkts	27 Pkts	24 C
1740629047	169 Pkts	167 Pkts	55 Pkts	24 C
1740625447	155 Pkts	148 Pkts	43 Pkts	24 C
1740621848	147 Pkts	140 Pkts	18 Pkts	25 C
1740618248	235 Pkts	234 Pkts	55 Pkts	25 C
1740614647	186 Pkts	181 Pkts	56 Pkts	25 C
1740611047	189 Pkts	183 Pkts	38 Pkts	24 C
1740607447	168 Pkts	161 Pkts	27 Pkts	24 C
1740603847	190 Pkts	183 Pkts	22 Pkts	24 C
1740600247	143 Pkts	139 Pkts	25 Pkts	24 C
1740596647	118 Pkts	114 Pkts	13 Pkts	24 C
1740593048	120 Pkts	113 Pkts	17 Pkts	23 C
1740589447	115 Pkts	110 Pkts	24 Pkts	22 C
1740585847	131 Pkts	127 Pkts	24 Pkts	22 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: