This is the latest recevied telemetry packets stored in our database for station/object IK2ILW. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | Dg1h* | Eff1h* |
|---|---|---|---|---|---|
| 1733084754 | 88 Pkt | 620 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733084453 | 91 Pkt | 640 Pkt | 0 Pkt | 0 Pkt | 80 Pcnt |
| 1733084153 | 98 Pkt | 640 Pkt | 0 Pkt | 0 Pkt | 80 Pcnt |
| 1733083853 | 97 Pkt | 650 Pkt | 0 Pkt | 0 Pkt | 80 Pcnt |
| 1733083552 | 103 Pkt | 660 Pkt | 0 Pkt | 0 Pkt | 80 Pcnt |
| 1733083252 | 121 Pkt | 680 Pkt | 0 Pkt | 0 Pkt | 81 Pcnt |
| 1733082952 | 114 Pkt | 670 Pkt | 0 Pkt | 0 Pkt | 80 Pcnt |
| 1733082652 | 98 Pkt | 660 Pkt | 0 Pkt | 0 Pkt | 80 Pcnt |
| 1733082351 | 104 Pkt | 670 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733082051 | 119 Pkt | 690 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733081751 | 111 Pkt | 700 Pkt | 0 Pkt | 0 Pkt | 78 Pcnt |
| 1733081450 | 114 Pkt | 700 Pkt | 0 Pkt | 0 Pkt | 78 Pcnt |
| 1733081150 | 109 Pkt | 710 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733080850 | 98 Pkt | 700 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733080550 | 121 Pkt | 700 Pkt | 0 Pkt | 0 Pkt | 78 Pcnt |
| 1733080249 | 130 Pkt | 710 Pkt | 0 Pkt | 0 Pkt | 78 Pcnt |
| 1733079949 | 114 Pkt | 710 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733079649 | 97 Pkt | 710 Pkt | 0 Pkt | 0 Pkt | 77 Pcnt |
| 1733079348 | 115 Pkt | 730 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733079048 | 126 Pkt | 730 Pkt | 0 Pkt | 0 Pkt | 78 Pcnt |
| 1733078748 | 132 Pkt | 720 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733078448 | 129 Pkt | 710 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733078147 | 122 Pkt | 710 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733077847 | 118 Pkt | 720 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
| 1733077552 | 98 Pkt | 730 Pkt | 0 Pkt | 0 Pkt | 79 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)