APRS Track Direct

My position About ☰

reset

WB2QGZ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WB2QGZ-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1741975119	216 Pkts	210 Pkts	83 Pkts	18 C
1741971519	229 Pkts	222 Pkts	85 Pkts	17 C
1741967919	226 Pkts	222 Pkts	89 Pkts	16 C
1741964319	234 Pkts	225 Pkts	61 Pkts	16 C
1741960719	215 Pkts	209 Pkts	67 Pkts	15 C
1741957119	224 Pkts	218 Pkts	63 Pkts	15 C
1741953519	212 Pkts	209 Pkts	62 Pkts	15 C
1741949919	266 Pkts	262 Pkts	83 Pkts	15 C
1741946319	250 Pkts	241 Pkts	75 Pkts	15 C
1741942719	223 Pkts	216 Pkts	70 Pkts	15 C
1741939119	246 Pkts	237 Pkts	76 Pkts	15 C
1741935519	249 Pkts	241 Pkts	60 Pkts	16 C
1741931919	206 Pkts	200 Pkts	68 Pkts	15 C
1741928319	229 Pkts	221 Pkts	63 Pkts	15 C
1741924719	261 Pkts	254 Pkts	86 Pkts	16 C
1741921119	224 Pkts	218 Pkts	69 Pkts	16 C
1741917519	208 Pkts	199 Pkts	62 Pkts	16 C
1741913919	214 Pkts	207 Pkts	85 Pkts	16 C
1741910319	259 Pkts	251 Pkts	123 Pkts	16 C
1741906719	236 Pkts	228 Pkts	103 Pkts	17 C
1741903119	225 Pkts	220 Pkts	79 Pkts	17 C
1741899519	237 Pkts	232 Pkts	93 Pkts	17 C
1741895919	280 Pkts	275 Pkts	104 Pkts	17 C
1741892319	273 Pkts	270 Pkts	112 Pkts	17 C
1741888719	283 Pkts	278 Pkts	139 Pkts	17 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: