APRS Track Direct

My position About ☰

reset

NY4I-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NY4I-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1740024929	0 Pkts	0 Pkts	0 Pkts	24 C
1740021329	0 Pkts	0 Pkts	0 Pkts	24 C
1740017729	0 Pkts	0 Pkts	0 Pkts	24 C
1740014129	0 Pkts	0 Pkts	0 Pkts	25 C
1740010529	126 Pkts	126 Pkts	64 Pkts	25 C
1740006929	320 Pkts	319 Pkts	189 Pkts	25 C
1740003329	426 Pkts	425 Pkts	209 Pkts	25 C
1739999729	340 Pkts	337 Pkts	179 Pkts	25 C
1739996130	334 Pkts	334 Pkts	185 Pkts	25 C
1739992530	349 Pkts	346 Pkts	188 Pkts	26 C
1739988929	308 Pkts	308 Pkts	185 Pkts	26 C
1739985328	352 Pkts	352 Pkts	209 Pkts	26 C
1739981732	350 Pkts	348 Pkts	208 Pkts	26 C
1739978127	306 Pkts	305 Pkts	185 Pkts	27 C
1739974526	300 Pkts	298 Pkts	169 Pkts	25 C
1739970926	267 Pkts	267 Pkts	154 Pkts	25 C
1739967326	292 Pkts	290 Pkts	154 Pkts	25 C
1739963726	271 Pkts	270 Pkts	121 Pkts	25 C
1739960126	239 Pkts	239 Pkts	138 Pkts	25 C
1739956526	262 Pkts	262 Pkts	153 Pkts	25 C
1739952930	281 Pkts	277 Pkts	157 Pkts	25 C
1739949326	253 Pkts	253 Pkts	149 Pkts	26 C
1739945726	261 Pkts	261 Pkts	159 Pkts	26 C
1739942126	275 Pkts	274 Pkts	161 Pkts	25 C
1739938526	296 Pkts	296 Pkts	179 Pkts	26 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: