APRS Track Direct

My position About ☰

reset

KK4ZDZ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK4ZDZ-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1740279354	205 Pkts	199 Pkts	110 Pkts	52 C
1740275755	198 Pkts	193 Pkts	99 Pkts	52 C
1740272155	210 Pkts	206 Pkts	109 Pkts	52 C
1740268554	231 Pkts	227 Pkts	101 Pkts	53 C
1740264954	242 Pkts	235 Pkts	119 Pkts	53 C
1740261354	188 Pkts	183 Pkts	95 Pkts	54 C
1740257754	266 Pkts	260 Pkts	139 Pkts	54 C
1740254154	234 Pkts	228 Pkts	122 Pkts	54 C
1740250554	232 Pkts	223 Pkts	92 Pkts	54 C
1740246955	235 Pkts	231 Pkts	105 Pkts	52 C
1740243355	235 Pkts	231 Pkts	103 Pkts	52 C
1740239755	222 Pkts	219 Pkts	95 Pkts	51 C
1740236154	245 Pkts	238 Pkts	91 Pkts	51 C
1740232554	226 Pkts	221 Pkts	103 Pkts	52 C
1740228955	189 Pkts	187 Pkts	92 Pkts	51 C
1740225354	176 Pkts	168 Pkts	99 Pkts	51 C
1740221753	185 Pkts	183 Pkts	88 Pkts	51 C
1740218152	188 Pkts	187 Pkts	87 Pkts	51 C
1740214553	175 Pkts	170 Pkts	80 Pkts	51 C
1740210953	206 Pkts	204 Pkts	95 Pkts	51 C
1740207353	205 Pkts	200 Pkts	88 Pkts	51 C
1740203753	223 Pkts	215 Pkts	99 Pkts	51 C
1740200151	271 Pkts	266 Pkts	121 Pkts	51 C
1740196551	275 Pkts	269 Pkts	101 Pkts	55 C
1740192951	264 Pkts	259 Pkts	103 Pkts	52 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: