APRS Track Direct

My position About ☰

reset

N7MTC-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7MTC-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1740157039	282 Pkts	281 Pkts	121 Pkts	22 C
1740153439	282 Pkts	281 Pkts	119 Pkts	22 C
1740149838	273 Pkts	267 Pkts	120 Pkts	22 C
1740146239	290 Pkts	285 Pkts	124 Pkts	22 C
1740142638	303 Pkts	297 Pkts	120 Pkts	22 C
1740139036	304 Pkts	281 Pkts	108 Pkts	22 C
1740135436	291 Pkts	286 Pkts	124 Pkts	23 C
1740131836	250 Pkts	245 Pkts	97 Pkts	22 C
1740128236	259 Pkts	256 Pkts	104 Pkts	22 C
1740124636	260 Pkts	257 Pkts	115 Pkts	22 C
1740121036	264 Pkts	256 Pkts	115 Pkts	22 C
1740117436	321 Pkts	316 Pkts	122 Pkts	23 C
1740113836	303 Pkts	297 Pkts	128 Pkts	23 C
1740110236	279 Pkts	273 Pkts	107 Pkts	23 C
1740106652	354 Pkts	350 Pkts	133 Pkts	23 C
1740103036	380 Pkts	375 Pkts	130 Pkts	23 C
1740099437	408 Pkts	403 Pkts	129 Pkts	23 C
1740093630	391 Pkts	387 Pkts	111 Pkts	23 C
1740090023	449 Pkts	445 Pkts	173 Pkts	23 C
1740086424	414 Pkts	411 Pkts	154 Pkts	22 C
1740080497	379 Pkts	374 Pkts	135 Pkts	22 C
1740076897	390 Pkts	383 Pkts	131 Pkts	22 C
1740073297	390 Pkts	388 Pkts	131 Pkts	22 C
1740069697	383 Pkts	379 Pkts	136 Pkts	22 C
1740066097	431 Pkts	425 Pkts	155 Pkts	22 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: