This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1741966259 | 30 Count | 48 Count | 5 Count | 0 VDC | 0 VDC |
| 1741965232 | 25 Count | 48 Count | 5 Count | 0 VDC | 0 VDC |
| 1741964711 | 20 Count | 48 Count | 5 Count | 0 VDC | 0 VDC |
| 1741964539 | 10 Count | 48 Count | 5 Count | 0 VDC | 0 VDC |
| 1741961850 | 5 Count | 48 Count | 5 Count | 0 VDC | 0 VDC |
| 1741960049 | 130 Count | 1034 Count | 113 Count | 0 VDC | 0 VDC |
| 1741958249 | 124 Count | 988 Count | 108 Count | 0 VDC | 0 VDC |
| 1741956448 | 118 Count | 944 Count | 103 Count | 0 VDC | 0 VDC |
| 1741954648 | 113 Count | 892 Count | 99 Count | 0 VDC | 0 VDC |
| 1741952847 | 107 Count | 839 Count | 94 Count | 0 VDC | 0 VDC |
| 1741951046 | 101 Count | 768 Count | 89 Count | 0 VDC | 0 VDC |
| 1741949246 | 95 Count | 712 Count | 84 Count | 0 VDC | 0 VDC |
| 1741947445 | 80 Count | 650 Count | 70 Count | 0 VDC | 0 VDC |
| 1741945644 | 74 Count | 594 Count | 65 Count | 0 VDC | 0 VDC |
| 1741943844 | 69 Count | 546 Count | 61 Count | 0 VDC | 0 VDC |
| 1741942043 | 63 Count | 504 Count | 56 Count | 0 VDC | 0 VDC |
| 1741940243 | 51 Count | 475 Count | 45 Count | 0 VDC | 0 VDC |
| 1741938441 | 45 Count | 404 Count | 40 Count | 0 VDC | 0 VDC |
| 1741936641 | 30 Count | 283 Count | 26 Count | 0 VDC | 0 VDC |
| 1741934840 | 23 Count | 220 Count | 20 Count | 0 VDC | 0 VDC |
| 1741933040 | 18 Count | 167 Count | 16 Count | 0 VDC | 0 VDC |
| 1741931239 | 11 Count | 108 Count | 10 Count | 0 VDC | 0 VDC |
| 1741929439 | 6 Count | 52 Count | 6 Count | 0 VDC | 0 VDC |
| 1741927638 | 83 Count | 1021 Count | 70 Count | 0 VDC | 0 VDC |
| 1741925837 | 78 Count | 959 Count | 66 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)