APRS Track Direct

My position About ☰

reset

VK2RZ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	FreeM*	RxP*	TxP*
1732597719	0.95 Load	14701 Mb	1267 Pkt	754 Pkt
1732597119	0.94 Load	14718 Mb	1406 Pkt	784 Pkt
1732596518	0.92 Load	14718 Mb	1261 Pkt	770 Pkt
1732595918	0.93 Load	14726 Mb	1229 Pkt	851 Pkt
1732595318	1 Load	14711 Mb	1230 Pkt	481 Pkt
1732594719	0.89 Load	14714 Mb	1130 Pkt	620 Pkt
1732594119	1 Load	14712 Mb	1229 Pkt	751 Pkt
1732593519	1.04 Load	14717 Mb	1278 Pkt	625 Pkt
1732592919	0.97 Load	14717 Mb	1600 Pkt	1071 Pkt
1732592319	1.08 Load	14709 Mb	1131 Pkt	757 Pkt
1732591719	1.08 Load	14700 Mb	1174 Pkt	420 Pkt
1732591118	0.98 Load	14721 Mb	1350 Pkt	909 Pkt
1732590518	0.95 Load	14696 Mb	1132 Pkt	668 Pkt
1732589918	0.93 Load	14709 Mb	1143 Pkt	426 Pkt
1732589318	0.95 Load	14714 Mb	1256 Pkt	749 Pkt
1732588718	1.04 Load	14704 Mb	1035 Pkt	716 Pkt
1732588118	1 Load	14698 Mb	1310 Pkt	493 Pkt
1732587519	0.94 Load	14720 Mb	1223 Pkt	824 Pkt
1732586919	0.93 Load	14718 Mb	1188 Pkt	737 Pkt
1732586319	0.91 Load	14718 Mb	1099 Pkt	443 Pkt
1732585719	0.94 Load	14717 Mb	1305 Pkt	799 Pkt
1732585119	0.91 Load	14716 Mb	1105 Pkt	748 Pkt
1732584519	0.96 Load	14693 Mb	1214 Pkt	445 Pkt
1732583918	0.89 Load	14722 Mb	1172 Pkt	812 Pkt
1732583318	0.89 Load	14696 Mb	1190 Pkt	710 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: